天基照相跟踪空间碎片批处理轨道确定研究

随着国内外天基观测空间碎片研究的展开,文章提出了利用跟踪卫星的CCD(Charge
Coupled Device)相机对空间碎片进行轨道探测的方法,首先建立了CCD照相观测模型和基于 照相观测 的空间碎片批处理轨道确定模型。通过对CCD相机底片归算方法的分析可知,利用
CCD相机所获得的观测数据与跟踪卫星的姿态无关,且其精度只与测量和坐标转换计算的精 度有关,在测量和计算中可获得较高的精度。分别对分布密度较高的低轨道和地球同步 轨道区域的空间碎片进行了定轨分析。仿真结果表明,定轨时采用两个跟踪弧段的照相数据 定轨精度大大高于一个弧段照相数据的定轨精度;跟踪卫星距离空间碎片越近,定轨精度越 高;低轨道空间碎片的定轨精度高于地球同步轨道上的空间碎片定轨精度。
     

基于GPS的低轨伴飞卫星自主导航轨道确定

对基于EKF算法的相对导航滤波器和基于全球卫星定位系统(GPS)伪距测量的伴飞星定轨进行了研究。用几何法与相对动力学方法联合获得目标星轨道信息,给出了伴飞卫星伪距测量定位的模型。仿真结果表明:该定轨方法可用于低轨卫星实时定位导航,定轨精度较高。     

一种近地航天器脉冲星地固系动力学定轨方法

为改善近地航天器脉冲星导航的定轨精度,设计一种地固系动力学定轨方法。该方法结合了更精确的地球引力场模型,在求地球引力势梯度基础上引入惯性力,建立了地固系下轨道动力学方程;并结合脉冲相位量测,使用扩展卡尔曼滤波实现航天器轨道参数实时估计。此方法可以降低动力学方程非线性度,尤其适用于地球静止轨道卫星。通过数学仿真校验了新方法的有效性与精度。     

Digital signal processing and numerical analysis for radar in geophysical applications

Numerical solutions for signal processing are described in this work as a contribution to study of echo detection methods for ionospheric sounder design. The ionospheric sounder is a high frequency radar for geophysical applications. The main detection approach has been done by implementing the spread-spectrum techniques using coding methods to improve the radar’s range resolution by transmitting low power. Digital signal processing has been performed and the numerical methods were checked. An algorithm was proposed and its computational complexity was calculated.     

深空探测中多普勒的建模与应用

针对深空探测中的多普勒观测资料的单程和三程模式,分别给出了瞬时和积分的观测模型,双程多普勒观测模型是三程模式的一个特殊情况.通过比较瞬时和积分多普勒的差异,推断在积分周期取得足够小时,瞬时观测模型与积分模型是一致的.利用2009年8月份对火星探测器MEX的三程多普勒测轨资料的处理,检验了三程多普勒资料观测模型的正确性,利用约一个圈次8小时三程多普勒数据进行轨道计算,定轨结果与欧空局重建轨道位置差约几百米.     

Feasibility of performing space surveillance tasks with a proposed space-based optical architecture

Under ESA contract an industrial consortium including Aboa Space Research Oy (ASRO), the Astronomical Institute of the University of Bern (AIUB), and the Dutch National Aerospace Laboratory (NLR), proposed the observation concept, developed a suitable sensor architecture, and assessed the performance of a space-based optical (SBO) telescope in 2005. The goal of the SBO study was to analyse how the existing knowledge gap in the space debris population in the millimetre and centimetre regime may be closed by means of a passive optical instrument. The SBO instrument was requested to provide statistical information on the space debris population in terms of number of objects and size distribution. The SBO instrument was considered to be a cost-efficient with 20 cm aperture and 6° field-of-view and having flexible integration requirements. It should be possible to integrate the SBO instrument easily as a secondary payload on satellites launched into low-Earth orbits (LEO), or into geostationary orbit (GEO). Thus the selected mission concept only allowed for fix-mounted telescopes, and the pointing direction could be requested freely. Since 2007 ESA focuses space surveillance and tracking activities in the Space Situational Awareness (SSA) preparatory program. Ground-based radars and optical telescopes are studied for the build-up and maintenance of a catalogue of objects. In this paper we analyse how the proposed SBO architecture could contribute to the space surveillance tasks survey and tracking. We assume that the SBO instrumentation is placed into a circular sun-synchronous orbit at 800 km altitude. We discuss the observation conditions of objects at higher altitude, and select an orbit close to the terminator plane. A pointing of the sensor orthogonal to the orbital plane with optimal elevation slightly in positive direction (0° and +5°) is found optimal for accessing the entire GEO regime within one day, implying a very good coverage of controlled objects in GEO, too. Simulations using ESA’s Program for Radar and Optical Observation Forecasting (PROOF) in the version 2005 and a GEO reference population extracted from DISCOS revealed that the proposed pointing scenario provides low phase angles together with low angular velocities of the objects crossing the field-of-view. Radiometric simulations show that the optimal exposure time is 1–2 s, and that spherical objects in GEO with a diameter of below 1 m can be detected. The GEO population can be covered under proper illumination nearly completely, but seasonal drops of the coverage are possible. Subsequent observations of objects are on average at least every 1.5 days, not exceeding 3 days at maximum. A single observation arc spans 3° to 5° on average. Using a simulation environment that connects PROOF to AIUB’s program system CelMech we verify the consistency of the initial orbit determination for five selected test objects on subsequent days as a function of realistic astrometric noise levels. The initial orbit determination is possible. We define requirements for a correlator process essential for catalogue build-up and maintenance. Each single observation should provide an astrometric accuracy of at least 1”–1.5” so that the initially determined orbits are consistent within a few hundred kilometres for the semi-major axis, 0.01 for the eccentricity, and 0.1° for the inclination.     

Geostationary orbit determination using SATRE

A new strategy of precise orbit determination (POD) for GEO (Geostationary Earth Orbit) satellite using SATRE (SAtellite Time and Ranging Equipment) is presented. Two observation modes are proposed and different channels of the same instruments are used to construct different observation modes, one mode receiving time signals from their own station and the other mode receiving time signals from each other for two stations called pairs of combined observations. Using data from such a tracking network in China, the results for both modes are compared. The precise orbit determination for the Sino-1 satellite using the data from 6 June 2005 to 13 June 2005 has been carried out in this work. The RMS (Root-Mean-Square) of observing residuals for 3-day solutions with the former mode is better than 9.1 cm. The RMS of observing residuals for 3-day solutions with the latter mode is better than 4.8 cm, much better than the former mode. Orbital overlapping (3-day orbit solution with 1-day orbit overlap) tests show that the RMS of the orbit difference for the former mode is 0.16 m in the radial direction, 0.53 m in the along-track direction, 0.97 m in the cross-track direction and 1.12 m in the 3-dimension position and the RMS of the orbit difference for the latter mode is 0.36 m in the radial direction, 0.89 m in the along-track direction, 1.18 m in the cross-track direction and 1.52 m in the 3-dimension position, almost the same as the former mode. All the experiments indicate that a meter-level accuracy of orbit determination for geostationary satellite is achievable.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

基于Nash-Pareto策略的两种改进算法及其应用

针对多目标、多设计变量的优化问题,提出了两种优化的新算法:一种是将多目标问题转化为单目标时,对目标权重的确定提出了新的途径;另一种是直接对多目标问题进行优化,并对Pareto遗传优化技术作了改进,以得到均匀分布的Pareto最优解集.两种新算法都是建立在Nash的系统分解与Pareto遗传算法的基础上,因此称这类算法为Nash-Pareto策略.借助于这类算法,文中以跨声速压气机双圆弧类叶型的气动优化为例,给出了气动优化的全过程.数值优化的实验表明所给出的改进算法是可行的、有效的.     

卫星星座整网轨道确定分析与仿真

编队飞行的卫星或卫星星座对轨道确定自主性和精度提出了较高要求。针对这个问题,通过建立星座的轨道动力学模型和星间观测的测量模型,将星座中的星间观测数据和地面观测数据融合起来,将待估的卫星轨道参数和部分动力学参数进行适当的分类,研究卫星星座整网轨道确定的新方法,并在理论上分析了整网定轨方法能提高定轨精度的原因;最后采用自主开发的卫星星座整网轨道确定软件进行了仿真计算。计算表明,该方法能有效地减少对地面站的依赖,并较大幅度提高定轨时卫星绝对位置和相对位置精度。